Canon IMAGE FORMULA DR-C125 - Manual (Page 55)

55
D When specifying the scanning conditions of the back, configure the
settings in the same way as described in B to C. In this case,
specify [Stream count of Back], and then set the scanning
conditions for each of [Back 1st] to [Back 3rd].
Hint
The following shows the setting conditions that can be set in the
multistream settings.
When you want to save a scanner driver setting
When you finish configuring a setting, click the [Save] button of [User
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting
from the list with the [Delete] button, and save or load a configuration
file with the [Back Up] or [Restore] button.
Hint
The preregistered [Full Automatic Mode] cannot be deleted from
[User Preference].
Tab Items that can be set
[Basic] tab
[Color mode] and [Dots per inch]
(excluding [Detect automatically] for
both)
[Brightness] tab [Brightness] and [Contrast]
[Image processing] tab
[Edge emphasis], [Color drop-out] and
[Character Emphasis]
[Feeding] tab None (all disabled)
[Others] tab None (only [Use MultiStream] is enabled)