Hardware installation – Connect Tech CANpro/104-Plus User Manual
Page 7
CANpro/104-Plus Opto User Manual
7
www.connecttech.com
CTIM-00052 Revision 0.00 4/23/2009
800-426-8979 | 519-836-1291
Hardware Installation
Before You Begin
Before you begin, take a minute to ensure that your package includes the required components that should
have shipped with your CANpro/104-Plus Opto.
●
One CANpro/104-Plus Opto CAN controller board
●
One CD containing documentation
If anything is missing, contact
or your reseller. Also, visit th
device driver software.
Installing the CANpro/104-Plus Opto Into Your System
Turn off the power to your embedded computer and open any enclosures needed to access the PC/104-
Plus or PCI-104 expansion connectors.
Carefully insert the board into the PC/104-Plus or PCI-104 connector.
Set the ID rotary switch accordingly (see
Set the correct on-board jumpers for each CAN port (J1 – J6) (see pages 9-10 for more details).
Power on your embedded computer and install the appropriate drivers for your operating system.