Casablanca Fan Company Modena II C10GXXM - Manual (Page 7)

7
M
odena
®
II
INSTALLATION HALOGEN BULB AND GLASS
Step 13. Screw the 100 Watt Halogen bulb into the
socket. If it is touched, or dirty, clean carefully with
a tissue. A dirty glass bulb will cause the bulb to fail
almost immediately.
Step 14. Position the indentations in the outer rim of
the glass shade so that they line up with the tabs on the
inside surface of the fan light fixture rim.
Step 15. Carefully lift the glass shade up inside the
lightfixture as far as it will go.
Step 16. Rotate the shade in a clockwise direction
until it is held tightly in place by the three tabs.
CAUTION! Do not touch the bulb with your
fingers–it is extremely important that the glass
be clean.
CAUTION! Improper installation of glass may
cause it to be damaged or it to fall and break.
NOTE: In compliance with US Federal Energy
Regulations, this ceiling fan contains a device
that restricts the light fixture to a maximum of
190 watts. Exceeding that limit or the marked
limit on this product may result in a fire hazard
or improper operation.