Creda Tumble Dryer - Manual (Page 17)

Easy Care Programme - Advance, Excel, Easy Care and ECO Sensor
Models
When to use
‘Easy Care’
Important!
Audio Signal
Creda ‘Easy Care’ provides a short programme consisting of approxi-
mately 7.5 minutes of heat with an approximately 2.5 minutes cool
tumble period. It is a short conditioning programme that softens the
fibres allowing them to relax making handling and ironing easier and
less time consuming.
However garments are dried, outside on the line, inside on a radiator,
hung around the home or using a tumble dryer, once dry they usually
get left in the same position/place for a long period of time. This tends
to cause garment fibre stiffness which can make the handling of gar-
ments difficult and therefore the ironing time longer. Garments dried in
any of the ways described above and left will benefit from the ‘Easy
Care’ programme.
● The ‘Easy Care’ cycle is not a drying programme. It has been
designed to condition/soften garments that have already been
dried and left unattended in this state for a period of time.
● All materials do not behave in exactly the same way when heated.
For instance, our testing has shown that materials such as
Tencel® and Acrylics are not relaxed quite as effectively by
applying the ‘Easy Care’ cycle as we found on the more traditional
Cottons and Polycottons.
● To obtain the best results from ‘Easy Care’ it is important that the
weights recommended below are not exceeded and high heat is
selected. (Heat switch IN).
● For best results Creda recommend garments should be
removed from the dryer immediately after the ‘Easy Care’
programme to be hung, folded neatly or ironed.
When this is not possible the ‘Easy Care’ programme should
be repeated.
Recommended weights and materials
On completion of the programme an audio signal is sounded (if select-
ed) to remind you to remove garments from the dryer.
Material Maximum load
Cotton and Cotton mixtures 2.5kg
2kg
2kg
5.5lb
4.4lb
4.4lb
Synthetics
Denim
17