Canon CDI-M186-010 - Manual (Page 29)

27
Cancel Printing
• To cancel printing between images printed, press the SET
button. A confirmation dialog appears. Select [OK] and press
the SET button. The printer will stop printing the current image
and eject the paper.
Restarting Printing
• Select [Resume] and press the SET button. The remaining
images can be printed.
• Printing cannot be restarted under the following circumstances.
• If the print settings have been changed before restarting.
• If the image for which the print settings were set has been
deleted before restarting.
• If there was very little free space on the memory card when
the printing was canceled.
If these circumstances apply, you can select [Print] and reprint
starting from the first image.
• If printing is canceled because the camera battery is depleted,
you are recommended to power the camera with a compact
power adapter (sold separately).
If you are using a battery pack or batteries, please use either a
fully charged battery pack or new batteries. After replacing the
spent battery pack or batteries, turn the camera power on
again.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 28) for details.