Trimming nose hair – Philips NT9130-40 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Inserting the Battery

I Make sure your hands and trimmer are

dry when inserting the battery.

►

This appliance requires 1 “AA” 1.5 volt

alkaline battery.

►

A new battery has an operating time of up to

2 hours.

►

Keep the appliance at a temperature between

40°F and 100°F.

►

Do not keep the appliance in direct sunlight.

D

Make sure trimmer is in the Off (0) position.

Q Turn the battery compartment to the left

so that the setting indicator points to the
‘open’ indicator (fig. 1).

Q Remove the battery compartment by pulling

it downwards (fig. 2).

D Put the battery in the battery compartment as

shown making sure the (+) and (-) markings
on the end of the battery match the (+) and (-)
markings on the battery compartment (fig. 3).

Q If the battery is not inserted properly, the

appliance will not work.

Q Slide the battery compartment cover back

onto the trimmer.

Q Turn the battery compartment to the right

so that the setting indicator points to the
‘Off’ (0) indicator (fig. 4).

►

If the appliance will not be used on a regular

basis, remove the battery when storing the

appliance to prevent possible damage due to

chemical leakage.

►

If the battery does leak, remove carefully.

Never allow your bare skin to come into

contact with the leaking fluid.

Using the Trimmer

►

You can use the trimmer to trim nose hair, ear

hair or neck hair.

►

Use the eyebrow combs to trim your

eyebrows to a uniform hair length.

►

Use the precision trimmer head to shape

and maintain beard, sideburns and neck hair.

►

If using the precision head trimmer for the

the first time, attach the detailer comb to

prevent trimming hairs too short.

►

Test trimmer on a small area of your arm or

leg. If any sensitivity occurs, discontinue using
immediately. Do not use trimmer on sensitive
or irritated skin.

►

Turn trimmer off before putting on or taking

off attachments or cleaning.

Trimming Nose Hair

n Make sure nasal passages are clean before

trimming.

Q Remove the Protective Cap by pulling it off

the trimmer (fig. 5).

B Turn trimmer ON by turning the battery

compartment to the right until the setting

indicator points to the ‘ I ’ (on) indicator
(fig-6).

□ Carefully insert the trimmer tip into one

nostril.

CAUTION: DO NOT INSERT THE TIP

MORE THAN %"/6mm INTO NOSTRIL.

B Slowly move the trimmer tip in and out of

each nostril to remove unwanted hair (fig. 7).

B For best results, make sure the side of the tip

is held firmly against the skin. This will
reduce the tickling effect that can occur.

Q Turn trimmer OFF by turning the battery

compartment to the left until the setting

indicator points to the ’0’ (off) indicator
(fig-8).

lil Clean trimmer immediately after using.

Advertising