Operating pronto with rf, Using the power feetures – Philips TSU3000 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Power Feetures
User Guide
Operating Pronto with RF
By default, Pronto uses
infrared
(IR) signals to operate devices. IR signals have an
operating distance of approximately 33 ft (10 m).
However, you can choose to have Pronto working with radio frequency (RF) signals
to operate devices from a distance or from an adjacent room. An RF Extender (not
included) is therefore required.
The RFX6000 is an RF Extender that can be used in combination with Pronto.
The RF Extender receives RF signals from Pronto and converts them into IR signals,
sent out to the device. Therefore, the RF Extender has to be placed near the device
you are operating with the RF Extender's sending eye pointed towards the device.
Pronto
RF Extender
34