Tape operation / recording, Preparation for recording, Synchro start cd recording – Philips MCM25037 User Manual

Page 16: One touch recording, Recording tinner, Recording timer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

I

Tape Operation / Recording

Preparation for recording

1

Select

TAPE

source.

2

Load a recordable tape into tape deck with full

spool to the left.

3

Prepare the source to be recorded.

CD

- load the disc.

TUNER

-tune to the desired radio station.

AUX

- connect external equipment

When recording is in progress

REC

starts flashing.

To stop recording, press ■.

It is not possible to listen to another source.

It is not possible to activate the timer function.

Synchro start CD recording

1

Select

CD

s

#

Press or (N or N) to select the

desired track to start recording.

You can programme the tracks in the order you

want them to be recorded (refer to "CD/MP3-

CD Operations - Programming the disc tracks").

2

Press

REC

to start recording.

Playing of the CD programme starts

automatically from the beginning of the CD

after 7 seconds. It is not necessary to start the

CD player separately.

One touch recording

1

Select

CD, TUNER

or

AUX

source.

2

3

Press

REC

to start recording.

If necessary, start playback of the selected

source.

Recording tinner

To record from the radio, you will need to use a

preset radio station and to set a start (ON) and

finish (OFF) time.

1

Select the preset radio station to record from

(refer to "Radio Reception -Tuning to preset

radio stations").

2

In standby mode, press

TIMER SET

for more

than two seconds.

0

flashes and a source is displayed.

3

Press

SOURCE

repeatedly until “RECTUN”

source is displayed.

4

Press

TIMER SET

to confirm the source.

"SET ON TIME"

is displayed, 0- and the

clock digits for the hours flash.

5

Press

VOLUME

+/— to set the hours.

6

Press

TIMER SET

again.

The clock digits for the minutes flash.

7

Press

VOLUME

+/—• to set the minutes.

8

Press

TIMER SET

to confirm the recording

start time.

"SET OFF TIME"

is displayed, 0 and the

clock digits for the hours flash.

9

Repeat steps

5-7

to set the finish time.

10 Press

TIMER SET

to confirm the timer settings.

.0 is shown and the recording timer is now

set.

Note:

- The recording timer will not be activated if the

system is in tape play mode.

16

pg 001-020/M250/21-Eng

4

-

7:05PM

3140115 29261

Advertising