CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 47)

ADSL IP DSLAM
39
Routing Table {Routing Table}
Routing Table is a matrix with a network control protocol, which gives the
hierarchy of link routing at each node.
The Routing Table screen allows you to view the routing table built in the ADSL
IP DSLAM and modify them. The procedures are as follows:
1. Click on “List of Subscriber” of the Port configuration Menu. The Routing
Table screen appears with the default setting as follows:
2. Configure the Port No. (1~16), Name, Destinations and Subnet mask
separately, and then click on the Apply button.
3. The newly added routing node will be listed in the routing table. If to delete
one routing node, click on the Delete.
Note: only can the routing table be configurable, when the RFC-1483 mode is
configured as “Route”. Please refer to the setting in the PVC
Configuration, page 36.