Philips 32" Color TV Faux Flat w-active control - Manual (Page 17)

How TO U se the F ormat C ontrol (E xpand 4:3)
M any times while watching movies from a
DVD player the image is shown in “let­
ter box" format. This is the format that is
shown in movie theaters, when shown on a
TV screen, the image will have areas of black
on top and bottom of the screen. The FOR­
MAT Control can help to display the image as
close as possible to its original aspect ratio.
1
2
3
4
5
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR DOWN ▼ but­
ton until the word FEATURES is
highlighted.
Press the CURSOR RIGHT ^ but­
ton to display the FEATURES menu
options (AutoLock or Format).
Press the CURSOR DOWN T but­
ton until the word FORMAT is high­
lighted.
Press the CURSOR RIGHT ^ or
CURSOR LEFT buttons to select
one of the two options 4:3 or Expand
4:3.
4:3 - Standard format for the TV.
Expand 4:3 - Enlarges the picture to
fill out the entire screen area, eliminat­
ing the “letter box” effect.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
Note: The Expand 4:3 format can also be
activated using the CURSOR UP or
DOWN buttons when the onscreen
menu is not being displayed. Pressing
these buttons will toggle the standard
4:3 format and the Expand 4:3 format.
Main I
✓ Picture ► iBriohtness
«Sound Cotor
« Features Picture
«Install Sharpness
Tint
More...
I
_________
Main
o Picture AutoLock
o Sound Format
I V Features ► | Active Control
^ Install
Features
«AutoLock
✓ Format 43»
« Active Control
OR
I Features'
«AutoLock
✓ Format Expand 43 k
« Active Control
4:3 Expand 4:3
11