Important safety instructions – COBY electronic DP356 User Manual

Page 6

Advertising
background image

Page 6

Coby Electronics Corporation

ing-current line plug that has one blade wider than the other. This plug will only fit

into the power outlet in one direction. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the direction of the plug. If the plug

should still fail to fit, contact an electrician to replace the obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

12. Power-Cord Protection: Power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and at the point

which they exit from the product.

13. Protective Attachment Plug: The product may be equipped with an attachment plug

with overload protection. This is a safety feature. See the operating instructions for

replacement or directions to reset the protective device. If replacement of the plug

is required, be sure the service technician has used a replacement plug that has the

same overload protection as the original plug as specified by the manufacturer.

14. Outdoor Antenna Grounding: If an outside antenna is connected to the product, be

sure the antenna system is grounded so as to provide some protection against volt-

age surges and built-up static charges. Article 810 of the National Electrical Code,

ANS/NFPA 70 provides information with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size

of grounding conductors, location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode (see figure).

15. Lightning: For added protection for this product, unplug it from the wall outlet and discon-

nect the antenna or cable system during a lightning storm or when it is left unattended

and unused for long periods of time. This will prevent damage to the product due to

lightning or power-line surges.

Important Safety Instructions

Advertising