Philips 32PT830H - Manual (Page 21)

S etting the TV C lock U sing the T imer C ontrol
y our television comes with an on-screen
clock. During normal operation, the clock
appears on the screen when the STATUSIEXIT
button is pressed or if the TIMER DISPLAY
control is turned ON.
1
2
3
4
5
6
7
8
9
10
Press the MENU button on the
remote control to show the onscreen
menu.
Press the CURSOR DOWN button
twice to highlight FEATURES.
Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER wiQ
be highlighted.
With TIMER selected, press the CUR­
SOR RIGHT button again to shift the
display left and highlight the TIME con­
trol.
Press the CURSOR RIGHT button
again to highlight the time indicator area.
Press the CURSOR LEFT or CURSOR
RIGHT button to select the position or
digit you wish to enter.
Press the CURSOR UP or CURSOR
DOWN button to select the digits for the
time. Or press the NUMBERED but­
tons to enter the correct time.
Press the CURSOR RIGHT button to
move to the AM or PM position.
Press the CURSOR UP or DOWN
button to set AM or PM.
Press the STATUS/EXU button to
remove the menu from the screen.
NOTE: The TIMER Controls can also be
accessed by pressing the CLOCK button
on the remote control. See lower diagram
on this page.
H elpful H int
Remember, be sure to press 0 first and then
the hour number for single-digit entries.
The Clock also can be set automatically using
the AutoChron™ feature found on page 4 of
the Quick Use and Installation Guide that
came with your television.
The TV’s clock settings may be lost when the
TV is unplugged (or when AC power to the set
is interrupted).
1
PICTURE
• SOUND
INSTAU
TIHER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORtlAT
© © © ©
0 (0>
PHILIPS
Wfi-
■
FEATURES
TIME
• ACTIVE CTRL START TIME
* AutoLock STOP TIME
• aOSED CAP CHANNEL
• FORMAT
L
ACTIVATE
FEATURES
TIMER
AM
FEATURES
TIMER
- TIME
• START TIME
• STOP TIME
• CHANNEL
• ACTIVATE
- V
FEATURES
TIMER ▲
< TIME 1 10:30 AM 1
• START TIME ▼
• STOP TIME
• CHANNEL
• ACTIVATE
•
21