Helpful hint – Philips 32PT830H User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO U
se
the
F
reeze
C
ontrol
T T a v e you ever wished you could freeze the
1 i picture on the television broadcast to
write down a special telephone number or to
capture a needed address? Your television
will allow you to do just that with the press of
Just one button on the remote control.
■
With a signal on the television screen,
simply press the FREEZE button on
the remote control to stop the picture at
any given moment.
The screen will read “FREEZE ON”
momentarily and the picture frozen on
the screen.
2
Press the FREEZE button on the
remote control again to resume normal
viewing.
The screen will read “FREEZE OFF”
momentarily while the television dis
plays a normal moving picture again.
H
elpful
H
int
After freezing a picture on the screen, when
the FREEZE control is turned OFF, the nor
mal signal programming will be shown at
it’s present time. The signal that was being
shown while the picture was frozen will not
be viewable.
If the FREEZE button is pressed when the
AV4 Inputs (AV4 Channel) is tuned, the
screen will read “FREEZE NOT AVAIL.”
42