Philips HIFI RECEIVER - Manual (Page 15)

16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
Setting the sound
Note:
- ¡f your DVD is not encoded to allow you to change the
aspect ratio, TV shape cannot be changed.
-
TV System
Allows you to select the color system matching the
connected TV set
AUTO (default setting)
-
If the connected TV is multi system, select this mode.
The output format will be in accordance with the video
signal of the disc.
NTSC
- If the connectedTV is NTSC system, select this mode.
It will change the video signal of a PAL disc and output in
NTSC format
PAL
- If the connectedTV is PAL system, select this mode.
It will change the video signal of a NTSC disc and output in
PAL format
- Video Out
Video out selection enables you to choose the type of
video output suitable for your receiver.
Select PR PBY (default setting), if you have connected the
video output to yourTV using the Component Video Out
(Pr/Cr Pb/CbY) jacks.
SCART (this feature is not available for this model)
Select S-VIDEO. if you have connected the video output
to yourTV using S-Video jack.
- Screen Saver
if set to ON. when you leave the system in stop or pause
mode for more than one minute, the screen saver will be
activated. The default setting is OFF.
- Digital Output
Digital output selection enables you to specify the type of
digital output suitable for your amplifier or receiver
Select ALL (default setting), if you have connected the
digital output (COAXIAL or OPTICAL) to a multichannel
decoder receiver.
Select PCM 96K if the external component is capable of
processing digital signal input with sampling rates of 96 kHz.
Select PCM 48K if the external component is incapable of
processing 96 kHz digital signal input then convert to
standard signal with sampling rates of 48 kHz.
Select OFF to deactivate the digital output (COAXIAL or
OPTICAL).
- Night Mode
Set night mode to on to level out the volume. For
example, the disc will play at the same sound level
throughout the movie. The default setting is OFF.
Night function can also be accessed via the
remote control.
- Center Delay
If the listening position is closer to the center speaker than
the front speakers, you can set the center delay time to
improve the surround sound effect.
Options : 5ms, 3ms, 2ms, 1 ms or OFF (default setting).
- Rear Delay
If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the surround sound effect
Options : 15ms, 12ms, 9ms, 6ms (default setting), 3ms or
OFF.
- Test Tone (disc mode only)
If set to ON, the system will test the speaker settings. The
test signal is generated through the left, center; right and
surround speakers.The default setting is OFF.
P reparations 13