Cuisinart 01CU13179 - Manual (Page 6)

CUSTOM SETTINGS
Defrost Button
The “Defrost” button is designed to first defrost and then toast the
bread, by extending the toasting cycle slightly.
1. Insert slice(s) of bread:
Be sure that multiple slices do not overlap and the carriage is in
the up position.
2. Set the browning control:
Select desired browning level from light to dark with rotary
browning dial.
3. Set the slice control switch to the 1 Slice/2 Slice or
3 Slice/4 Slice position, as needed.
4. Press the carriage control lever down until it locks
into position.
5. Press the “Defrost” button.
The LED will illuminate when this feature is selected.
To stop cycle:
When the defrost and toast cycle is complete, the toaster will raise
the bread. If you wish to stop the cycle before it is
finished, simply press the “Cancel” button to interrupt at any time.
To remove toast, lift the extra-lift carriage control until
it reaches its highest point. This is especially useful when
toasting smaller breads.
Reheat Button
The reheat feature allows you to reheat toasted bread without
browning or toasting.
1. Insert slice(s) of bread:
Be sure that multiple slices do not overlap and the carriage is in
the up position.
2. Set the slice control switch to the 1 Slice/2 Slice or
3 Slice/4 Slice position, as needed.
3. Press the carriage control lever until it locks into position.
4. Press the “Reheat” button.
You do not have to set the browning dial, as this cycle will now
brown or toast the bread.
To stop cycle:
When the reheat cycle is complete, the toaster will raise the bread.
If you wish to stop the cycle before it is finished, simply press the
“Cancel” button to interrupt or lift up on the carriage control lever. To
remove toast, lift the extra-lift carriage control until it reaches its
highest point. This is especially useful when toasting smaller breads.
CLEANING AND MAINTENANCE
Always allow the toaster to cool completely before cleaning.
1. Always unplug the toaster from the electrical outlet.
2. Do not use abrasive cleansers. Simply wipe the exterior with a
clean, damp cloth and dry thoroughly. Apply any cleansing
agent to a cloth, not to the toaster, before cleaning.
3. To remove crumbs, slide out the crumb tray and discard
crumbs. Wipe clean and replace. Never operate the toaster
without the crumb tray in place.
4. To remove any pieces of bread remaining in the toaster, turn
the toaster upside down and gently shake. Never insert any
hard or sharp instruments into the slot, as this could damage
the toaster and cause a safety hazard.
5. Never wrap the cord around the outside of the toaster. Use the
cord storage cleats on the underside of the toaster.
6
Cancel Reheat Defrost
2
1
4 3
Cancel Reheat Defrost
4
3
2 1