Philips FW570C37 - Manual (Page 23)

RECORDING CLOCK
CD Synchro Start Recording_________________
I Load a blank tape into tape deck 2 and a disc into the
disc tray.
Z Press CD to seiect CD mode.
• You can program the tracks in the order you want them
to be recorded (see Programming Tracks). If not, the
tracks are recorded according to the selected disc.
3 Press RECORD to start recording.
— The REC flag starts flashing.
• CD wili start playback automatically.
1 Press STOP ■ to stop recording.
One Touch Recordinn
• For One Touch Recording, as soon as you press
RECORD, the current source wiil be recorded on tape
deck 2.
1 Load a biank tape in tape deck 2.
2 Press RECORD to start recording.
— The REC flag starts flashing.
3 Press STOP* to stop recording.
Note:
- When you press RECORD at TAPE mode, 'SELECT
OTHER SOURCE "willbe displayed. One Touch
Recording is not possible at TAPE mode.
View Clock
You can view the clock (if it is set) at standby or any
source mode. It will be displayed for about 7 seconds.
• Press CLOCK'TIMER briefly.
— " ¡D:SS" (the current time) will be displayed.
— " - -; - -" will be displayed if the ciock is not set.
Clock setting
The clock is set in 24-hour mode, e.g. DS'DD or
S3:53. Before setting the clock, you must be at the
View Clock mode.
1 Press CLOCK«TIMER to select clock mode.
— “00:00“ or the current time starts flashing.
— "•«, ►►, M , H, ■" light up.
2 Set the hour with «or».
3 Set the minute with M or W,
4 Press CLOCK'TIMER again to store the setting.
— The clock starts running.
• To exit without storing the setting, press STOP ■.
Notes:
- During clock setting, if no button is pressed within 90
seconds, the system will exit clock setting mode
automatically.
- When power interruption occurs, the clock setting is
erased.
- To set the time with RDS clock, see 'RECEIVING RDS
RADIO STATION' under TUNER section.
23