Perfect Aire PAC15000 - Manual (Page 8)

AIR CONDITIONER FEATURES(CONTINUED)
TO SELECT THE
OPERATING MODE:
Press the Mode
button.
DO THIS:
To choose operating mode, press the Mode button.
Each time you press the button, a mode is selected
in a sequence that goes from Auto, Cool, Dry , and Fan.
The indicator light beside will be illuminated and
remain on once the mode is selected.
NOTE:
To operate on Auto feature:
In this mode, the fan speed cannot be adjusted, it
starts automatically at a speed according to the
room temperature. If the room does not get too
warm, it will stay at Low speed.
To operate on Fan Only:
Use this function only when cooling is not desired,
for room air circulation or to exhaust stale
air(on some models). (Remember to open the vent
during this function, but keep it closed during
cooling for maximum cooling efficiency.) You can
choose any fan speed you prefer.
During this function, the display will show the actual
room temperature, not the set temperature as in the
cooling mode.
TO USE THE ENERGY
SAVER FEATURE:
Press the button
DO THIS:
In this mode, the fan will continue to run for 3 minutes
after the compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until the room
temperature is above the set temperature, at which
time the compressor turns back on and cooling starts.
NOTE:
SLEEP FEATURE:
Press Sleep
button
DO THIS:
7
Energy
Saver
Sleep Timer
Temp
Fan Dry
Mode Timer
Auto Cool On Off
Follow
Me
Energy
Saver
Sleep Timer
Temp
Fan Dry
Mode Timer
Auto Cool On Off
Follow
Me
Energy
Saver
Sleep Timer
Temp
Fan Dry
Mode Timer
Auto Cool On Off
Follow
Me
S
S
S
To operate on Dry mode:
In this mode, the air conditioner will generally
operate in the form of a dehumidifier. Since the
conditioned space is a closed or sealed area, some
degree of cooling will continue.
In this mode the selected temperature will increase by
O O 2 F/1 C 30 minutes after the mode is selected.
O O The temperature will then increase by another 2 F/1 C
after an additional 30 minutes. This new temperature will
be maintained for 6 hours before it returns to the originally
selected temperature. This ends the Sleep mode and the
unit will continue to operate as originally programmed.
The Sleep mode program can be cancelled at any time
during operation by again pressing the Sleep button.
NOTE: