Casio YA-P10 - Manual (Page 18)

E-17
Pointer Operations
The following pointer operations are supported on the projected image of a computer’s
RGB output.
Important! Important! Important!
z When using the pointer, take care to ensure that the pointer tip is not within any shadow cast
onto the projected image. The pointer will not function properly while its tip is within a shadow.
Left-click : Use the pointer tip to point at the location where you want to click (it is
not necessary to touch the screen with the pointer tip), and then press the
left mouse button. Or you could lightly touch the pointer tip to the location
where you want to click.
Right-click : Use the pointer tip to point at the location where you want to click (it is
not necessary to touch the screen with the pointer tip), and then press the
right mouse button.
Drag : Point the pointer tip at the location from which you want to start dragging
(it is not necessary to touch the screen with the pointer tip). Next, hold
down the left mouse button as you drag the pointer tip. When you reach
the end of the drag, release the left mouse button. You also could lightly
touch the tip of the pointer at the drag start point and drag on the screen,
keeping it lightly against the screen the whole way. When you reach the
end of the drag, remove the pointer tip from the screen.
YA-P10_Pointer_02_e.book 17 ページ ２０１１年３月２３日 水曜日 午後３時５分