phil&teds e3 twin buggy - Manual (Page 6)

two: swivel ` swerve
1.
Turn twin buggy over and lift front as
far as hinge will allow.
2.
Remove first front wheel from bag (the
rod is greased so watch out for greasy
fingers!).
4.
Release cap. Your wheel will be in
place for use.
5. Repeat for other front wheel.
to lock the front wheels
1.
Align silver button with small hole on
inside of front wheel black cap.
2.
Turn wheel towards rear wheels
of buggy so front wheel is directly
underneath footwell and parallel with
rear wheels.
3.
Cap will then fully close and fix front
wheel. Reverse for swivel.
3. Extend black
cap out fully
on underside
of footwell and
insert rod on
front wheel.
cap open cap closed
4
`
swivel fixed