phil&teds tott XTR - Manual (Page 9)

Make sure the seat belt has not become twisted. Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child, simply unfasten the seat belt in the normal way.
7
FITTING THE CAR SEAT WHEN ONLY USING THE 3- POINT SEAT BELT
According to children’s different height, the headrest can be adjusted up and down.
To make sure that the position fits for your child.
15-36kg
(approx. 3years to 11 years)
1
3
4
DIAGONAL BELT LAP BELT
Step1. Place the child safety seat on the vehicle’s seat ensuring it is firmly pressed
against the car seat backrest.
Step2. Pull out the belt from the reel into the space in front of the seat, making
sure the lap belt is placed under the armrest when pulling out,
Step4. Finally pull lap belt, diagonal belt and all the webbing and make sure
you have tightened all the seat belts.Ensure lap belt is worn low down so
that it rests on the pelvis and not the tummy.
Step3. Make sure the diagonal belt goes through the right
/
left red belt
guide. Make sure the car seat belt through from the seat belt route
slot on the other side and fasten it into the seat belt buckle.
1
2
Pres s
Pu ll
2