PiPO S3 - Manual (Page 9)

９
Go to “Gallery”, choose a photo to share. Tap icon or any spot on the
photo to view a submenu. Tap → → , and then choose the
device name in the Paired devices list. The photo will then be sent.
Touch the right icon to unpair the device.
Note: After pairing, it shows under the Bluetooth device “Paired but not
connected”, but file transmission is still possible.
You can see the received files by touch the top right corner icon.
At present, the Bluetooth function only supports files transmission.
To extend battery life, turn Bluetooth power off when it’s not in use.
3.3 3G Network
3.3.1 External 3G Network
A 3G network is a mobile network that allows high-speed data access and
advanced network capacity.
This tablet supports external 3G network by a 3G dongle. Connect the 3G
dongle to USB HOST port via the USB convertor cable, the convertor cable is
contained in the accessories. However, this tablet supports some 3G dongles,
but not all dongles. If you need a special dongles to support, please check
with the shop before you buy it.
IV. Internet Browsing
4.1 Internet Browsing
Before using your browser, make sure Wi-Fi or internet is connected.
In your app panel, Tab the browser icon to open your browser.
Tap the address bar, the Android keyboard will appear for your entry of
keywords or URL.