PRG DMX Reference Guide 5.4 - Manual (Page 36)

28 DMX512 REFERENCE GUIDE
Mini-ACS Rack
The mini-ACS rack is a small rack mount version of the ACS rack.
Unit features:
+ Provides 17 channels of power and signal.
+ Provides one trunk run output and eight powered lamp cable outputs.
+ Can be used as master or slave rack in large systems.
House power connects to the mini-ACS rack through an 8/5 cable with
Hubbell connectors, connected from a mini-AC line disconnect. Two other
power cables are available for connection: Hubbell plug connector to bare
pigtails and Epic plug connector to Hubbell receptacle connector.
Figure 2-5: Mini-ACS Rack
R
B
X Y Z
N
EARTH GND
Z
Y X
LUMINAIRE OUTPUTS
STATUS
OUTPUT BREAKERS
TRUNK OUTPUT
1 2 3 4 6 7 8 9
2 3 4 6 7 8 9
R ACS
MINI
SERIES 200 SYSTEM
BAR CODE
SERIAL NUMBER
Y
Z
X
N
G
POWER SOURCE
TYPE
-Y SWITCH POSITION -N VAC VAC -
Y
Y
Y Y
Y
Y
Y SINGLE PH
SINGLE PH
90-100
100-130
180-240
90-130
180-240
180-240
90-130
155-175
175-225
310-415
A B Y
SELECT CONSOLE
INTERCOM
DATA INPUT
CONSOLE A CONSOLE B 3 PHASE 30 AMP
MAINS INPUT
-Y SELECT R
House Power Input
from Mini AC Disconnect
Hubbell connector
Delta/Wye
Power Selector Switch
Signal input
from consoles
Power output to other devices. Power and Signal output to luminaires.
Trunk cable run to
Repeater Boxes
Individual output circuit breakers
and other ACS
racks.