Pro Boat PRB2500 User Manual
Page 3
3
Suggested Field Equipment and Supplies
Additional Required Items
Engine Tuning Screwdriver (DYN2775)
Replacement Glow Plugs (DYN2508 or DYN2500)
Hex driver/Allen wrench (1.5mm and 2.5mm)
Cable grease to lubricate drive shaft
Clean towels and rags
“AA” alkaline batteries
Adjustable wrench (small)
11mm wrench
Extra propellers
Contents
• Assembled Miss LLumar 1/12-Scale RTR
• JR
®
Python radio transmitter
• Prebuilt boat stand
Although the Miss LLumar comes fully assembled and ready for action, you will need a few tools to get your boat ready to run:
Blue Thunder 20% Fuel (quart) (DYN2320)
500cc Fuel Bottle (DYN2003) or
Fast Tap Quart Bottle Spout (DYN2009)
Glow Plug Wrench (DYN2510)
Ni-Cd Glow Driver (DYN1925)
12 “AA” alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear 3M tape to seal radio box
In addition to the items needed to run the Miss LLumar, we recommend that you carry the following in your field box: