Pro Boat PRB3200 User Manual
Page 6
Advertising
Section 1: Installing the Receiver and Transmitter Batteries
Receiver Batteries
m
.1..Remove.the.two.knurled.aluminum.
nuts.that.secure.the.cockpit.as.shown..
Pull.the.cockpit.off.the.boat.
m
.2..Carefully.note.how.the.exhaust.
system.is.assembled.
m
.3..Use.a.2.5mm.Allen.wrench.to.remove.
the.tuned.pipe.mount.as.shown.above.
m
.4..Carefully.remove.the.tuned.pipe.by.sliding.the.
silicone.coupler.apart.from.the.exhaust.header.
m
.5..Remove.the.clear.lid.that.
covers.the.radio.box.
m
.6..Remove.the.dry.cell.battery.holder.from.the.
radio.box.and.unwrap.the.foam.around.the.
dry.cell.battery.holder..Install.4.“AA”.alkaline.
batteries.into.it.as.shown..Note.the.proper.
polarity..Wrap.the.battery.box.in.foam.
Tuned.Pipe.Mount
Silicone.Coupler
Tuned.Pipe
Advertising