Installing the battery pack, Battery safety precautions – Pro Boat PRB4150 User Manual

Page 4

Advertising
background image

Blackjack 29

Installing the Battery pack

1. Turn the latch so the tab is parallel with the back of

the hull, then lift the hatch up and back from the hull.

2. Remove the radio box cover.
3. Install the included hook and loop tape on the battery

packs. Install the battery on the hook and loop strips in

the compartment.

Tip: Move the packs forward or back to adjust the center

of gravity for your boat. Move the packs toward the bow

so the bow rides lower in the water. Move the packs

away from the bow so that the bow rides higher in the

water.

4. Connect the battery packs to the ESC power

connectors, as needed.

5. Disassemble in reverse order.

3

1

2

Battery Safety precautions

• When using a Li-Po battery, always ensure the

Battery Chemistry Switch is in the ON position.

• Never discharge a Li-Po battery below 3V per cell.

• Always disconnect a battery from the ESC

when not in use.

• Avoid continually operating to LVC, as

this could result in damage to the battery.

4

EN

Advertising