Casio keyboard PX-320 - Manual (Page 32)

E-30
Recording and Play Back
7. When you are finished, press the START/
STOP button to stop recording.
• To stop recording with a rhythm/Auto
Accompaniment ending pattern, press the INTRO/
ENDING
button.
• Stopping recording will cause the REC lamp to go out
and the PLAY lamp to light.
• To play back the track you just recorded, press the
START/STOP button again.
8. After you are finished recording or playing
back, press the RECORDER button so the
PLAY lamp and REC lamp are off.
To record to one track of a song while
listening to the playback of the other
track
1. Press the RECORDER button so the PLAY
lamp is lit.
2. Use the T/NO and S/YES buttons to display
a song number (1 to 5).
3. Press the RECORDER button so the REC
lamp is flashing.
• This will cause the 1/L lamp to flash.
4. Use the TRACK/PART button to select the
track to which you want to record.
• Make sure that the lamp for the record track is
flashing.
Example: To listen to playback of Track 1 as you record
to Track 2
5.
Select the tone and effects you want to use
for your recording.
6. Press the START/STOP button or play
something on the keyboard to start
simultaneous playback from Track 1 and
recording to Track 2.
• This will start both playback of the recorded track
and recording to the other track.
7. When you are finished, press the START/
STOP button again to stop recording.
This indicator appears when the track contains recorded
data already.
Lit: Playback standby Flashing: Record standby
PX320_e.book 30 ページ ２００７年８月１日 水曜日 午前９時２８分