Progressive Industries SSP-30 - Manual (Page 2)

Smart Surge Instructions
1. Plug Smart Surge into AC power. DO NOT plug in your RV at this
time.
2. Verify that Number 1 red indicator light is lit to reflect power source is
wired correctly.
3. Verify green surge indicator light is lit.
4. If proper red and green lights are lit, (Refer to diagram below), plug in
RV at this time.
Notes
The green Surge Indicator tells you the condition of the surge protector
circuit. When the green indicator light is lit, surge protector is functional; if
not, surge protector is compromised and needs to be replaced.
The two red indicator lights denote the wiring of the power source.
The chart printed on the front of the Surge Protector tells you the
wiring condition based on which lights are lit.
Features
Specifications
Surge Indicator
Weather Resistant
Portable Design Rated at 120V/30A
Fuse Protected Joule Rating: 825J
Lifetime Warranty Surge Amps: 22,500
Response Time: <1 NS
Circuit Tester Checks
For:
Reverse Polarity
Open Neutral
Open Ground
Green Surge Indicator Light
Red Light Number 1
Red Light Number 2
Wiring Configuration
Light 1 on, Light 2 off = Correct Wiring
Light 1 off, Light 2 on = Reverse Polarity
Light 1 on, Light 2 on = Open Neutral
Light 1 off, Light 2 off = Open Ground