CREATIVE DSI V.92 - Manual (Page 13)

Installing Hardware 2-2
Step 2: Insert the
modem card 1. Align the modem card with the PCI slot and press the card gently but firmly into
the slot as shown in Figure 2-2.
2. Secure the modem card with the screw you had placed aside earlier.
Step 3: Connect to
power supply 1. Replace the computer casing.
2. Plug the power cord back into the wall outlet, and then turn on the computer.
To install drivers, refer to “Installing and Testing Modem Drivers” on page 3-1.
Do not force the modem card
into the slot. Make sure that
the gold finger PCI connector
on the modem card is aligned
with the PCI bus connector
on the motherboard before
you insert the card into the
PCI expansion slot.
If it does not fit properly,
gently remove it and try
again
.
Unused brackets
PCI
slot
ISA slot
Figure 2-2 Aligning the card against the slot.
2
1