PS Engineering PXE7300 Pilot’s Guide - Manual (Page 6)

6 PXE7300 Pilot Guide Rev 4 March 2003
5. MusicMatch will then convert the files from the audio CD to
MP3 and display them in the Music Library box located in the
middle of the screen
6. To edit the MP3 information, select a file in the Music Library
and press the TAG button in the top right corner of the Music
Library box. This will display the MP3 tagged information
screen. Select the General tab to show the information that can be
modified for the PXE7300.
7. The PXE7300 can display song name, artist, album, and file-
name. This corresponds to the Track title, Artist, Album, and
Track Filename fields shown on the screen. Each of these fields
can be modified to the user’s preference. Note: The PXE7300 is
limited to displaying up to 22 characters in each of these fields.
Click on the appropriate field to modify the track title, artist, or
album. To modify the filename, select the Rename Files button in
the lower left corner. Click on the field labeled New File Name
and press OK to change the file name. Press the Apply and OK
buttons to update the information
1.2 Creating Playback Files Using MusicMatch ( Option 1
Only)
1. Create up to five MP3 files with the desired playback messages.
These files must be named 0001.MP3 to 0005.MP3. File 0001
corresponds to playback input 1, etc.
2. Start MusicMatch JukeBox. Click the ADD icon in the Music
Library window to bring up the file dialogue box. Select the files
0001.MP3 – 0005.MP3 and click the ADD button. This will
transfer a copy of the files to the Music Library.
3. Select a file in the Music Library box and click on the TAG but-
ton to access the MP3 tagged information screen. Select the Gen-
eral tab to show the MP3 file information. Fill in the Track Title
field. This information will be displayed on the PXE7300 when
the file is active. This field may be up to 22 characters in length.
4. Select File->Create CD to open the CD burner window.
5. Select the MP3 disc icon to burn an MP3 disk.
6. Double click on the Volume Name box, located to the right of
the three disc types. Type 7300 in the window and press RE-
TURN to update the CD volume name.
7. Select the
ADD icon (+ sign) to open the file dialogue box. Se-
lect the files 0001.MP3 – 0005.MP3 and press the ADD button.
Make sure these files are located in the root directory of the
disc. Select any other MP3 files you wish to add to the disc.