PS Engineering PMA8000C Pilot’s Guide - Manual (Page 8)

Page 8 202-890-0303 Rev. 2 PMA8000C Pilot Guide
2.What access code do I use?
a. If your phone requires an access code to complete the pairing,
you can use 0000 (all zeros). See the table below if you wish to
change the audio panels access code to “1234,” or “1111”.
3. How many devices can I pair with the audio panel?
a. You can pair up to eight devices. After that, the audio panel
will “forget” one device when another is added. Due to the
nature Bluetooth, we can’t predict which device will be
dropped. If your desired device is dropped, simply re-pair the
one you want.
4. How many devices can I use at the same time?
a. You can connect multiple devices such as a Smartphone and an
iPad for music, but only one telephone can be connected to the
audio panel at a time.
5. Can I use a different music source other than my phone?
a. Yes, you can. However the music device, must be paired and
connected first, before the telephone is turned on. In Smart-
phone such as Motorola Droid, you should specifically disable
the Bluetooth phone or music portion, depending on function to
be used. Note, if an iPhone is connected second, you may not
be able to stop it from taking over the music. Some phones
must manually select the PMA8000C as an audio source for the
phone after the music is connected.
If you have difficulty connecting multiple devices, you may
need to reset the connection mode. To reset the Bluetooth pair-
ing scheme, turn off the audio panel, and turn back on while
holding the NAV 2 and ADF buttons. Hold the buttons until
you hear a chime in the pilot‘s headset.
6. My Smartphone didn’t reconnect, what do I do?
a. It is most likely that the PMA8000C dropped the pairing either
because of added pair that exceeded the limit, or because of
some corruption in the stored information. Simply un-pair by
Hold button on power up Pairing Code
COM 3 0000 (default)
NAV 1 1234
NAV 2 1111