PS Engineering PM3000 Pilot’s Guide User Manual
Page 7
7 202-193-0001
PM3000 Pilot Guide & User Manual
Section III Warranty and Service
In order for the factory warranty to be valid, the installations in a certified
aircraft must be accomplished by an FAA-certified avionics shop and author-
ized PS Engineering dealer. If the unit is being installed by a non-certified indi-
vidual in an experimental aircraft, a factory-made harness must be used for the war-
ranty to be valid.
PS Engineering, Inc. warrants this product to be free from defect in material and
workmanship for a period of one year from the date of installation. During this one-
year warranty period, PS Engineering, Inc., at its option, will send a replacement
unit at our expense if the unit should be determined to be defective after consulta-
tion with a factory technician.
This warranty is not transferable. Any implied warranties expire at the expiration
date of this warranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES. This warranty does not cover a defect
that has resulted from improper or unreasonable use or maintenance as determined
by us. This warranty is void if there is any attempt to dissemble this product without
factory authorization. This warranty gives you specific legal rights, and you may
also have other rights, which may vary from state to state. Some states do not allow
the exclusion of limitation of incidental or consequential damages, so the above
limitation or exclusions may not apply to you.
Factory Service
The PM3000 is covered by a one-year limited warranty. See warranty information.
Contact PS Engineering, Inc. at (865) 988-9800 or through www.ps-engine.com/
support.shtml, before you return the unit. This will llow the service technician to
provide any other suggestions for identifying the problem and recommend possible
solutions.
Units that arrive for repair without a method of payment will be returned via UPS
COD. PS Engineering will not be responsible for any item shipped via US Mail.
After discussing the problem with the technician and you obtain a Return Authori-
zation Number, ship product to:
PS Engineering, Inc.
Service Department
9800 Martel Road
Lenoir City, TN 37772
(865) 988-9800 FAX (865) 988-6619
www.ps-engineering.com
NOTE: PS Engineering will not be responsible for units returned by US
Mail, or in other than the original packaging.
Units received without either an RMA, or a detailed description of the
problem AND a contact telephone number, will be refused.