PS Engineering Tactical Radio Adapter - Manual (Page 12)

PS Engineering
Radio Adapter (12100) Series Interface
Installation Manual
200-002-0002 4-8 Rev. 5, Feb. 2009
points are protected from abrasion. Complete log book entry, FAA Form 337, weight and
balance computation and other documentation if required. Return completed warranty
registration application to PS Engineering.
Section III- Operation
There are no operational controls in this unit.
Section IV- Warranty and Service
4.1 Warranty
In order for the factory warranty to be valid, the installations in a certified aircraft must be
accomplished by an FAA- certified avionics shop and authorized PS Engineering dealer.
If the unit is being installed by in an experimental aircraft by the owner/builder, a factory-
made harness must be installed for the warranty to be valid.
PS Engineering, Inc. warrants this product to be free from defect in material and work-
manship for a period of one (1) year from the date of sale. PS Engineering, Inc., at its op-
tion, will send a replacement unit at our expense if the unit should be determined to be
defective after consultation with a factory technician.
This warranty is not transferable. Any implied warranties expire at the expiration date of
this warranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDENTAL OR CON-
SEQUENTIAL DAMAGES. This warranty does not cover a defect that has resulted from
improper or unreasonable use or maintenance as determined by us. This warranty is void
if there is any attempt to dissemble this product without factory authorization. This war-
ranty gives you specific legal rights, and you may also have other rights which may vary
from state to state. Some states do not allow the exclusion of limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you.
4.2 Factory Service
The unit is covered by a one-year limited warranty. See warranty information. Call PS
Engineering, Inc. at (865) 988-9800 before you return the unit. This will allow the service
technician to provide any other suggestions for identifying the problem and recommend
possible solutions.
After discussing the problem with the technician and you obtain a Return Authorization
Number, ship product to:
Service Department
PS Engineering, Inc.
9800 Martel Rd
Lenoir City, TN 37772
Phone (865) 988-9800
FAX (865) 988-6619
Email:
[email protected]