PS Engineering PM1000II Pilot’s Guide - Manual (Page 6)

6 202-123-0001 PM1000II-Pilot Guide & User Manual
Section 3
Warranty and Service
3.1 Warranty
In order for the factory warranty to be valid, the installations in a certified
aircraft must be accomplished by an FAA- certified avionics shop and au-
thorized PS Engineering dealer.
PS Engineering, Inc. warrants this product to be free from defect in mate-
rial and workmanship for a period of one year from the date of installation.
During this one year warranty period, PS Engineering, Inc., at its option,
will send a replacement unit at our expense if the unit should be determined
to be defective after consultation with a factory technician. The customer
is responsible for return shipment costs.
This warranty is not transferable. Any implied warranties expire at the ex-
piration date of this warranty. PS Engineering SHALL NOT BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty
does not cover a defect that has resulted from improper or unreasonable use
or maintenance as determined by us. This warranty is void if there is any
attempt to dissemble this product without factory authorization. This war-
ranty gives you specific legal rights, and you may also have other rights
which may vary from state to state. Some states do not allow the exclusion
of limitation of incidental or consequential damages, so the above limita-
tion or exclusions may not apply to you.
3.2 Factory Service
The PM1000II is covered by a one-year limited warranty. See warranty
information.
The unit is covered by a one-year limited warranty. See warranty informa-
tion. Call PS Engineering, Inc. at (865) 988-9800 before you return the
unit. This will allow the service technician to provide any other suggestions
for identifying the problem and recommend possible solutions.