Factory service – PS Engineering PCD7100-P Pilot’s Guide User Manual

Page 4

Advertising
background image

4

Rev. 2

PCD7100-P Pilot Guide

Select the tracks to be copied to MusicMatch by checking the box next to the de-
sired track. Press the record button in the lower left corner when complete

MusicMatch will then convert the files from the audio CD to MP3 and display them
in the Music Library box located in the middle of the screen

.

Warranty and Service

In order for the factory warranty to be valid, the installations in a certified aircraft must be
accomplished by an FAA-certified avionics shop and authorized PS Engineering dealer. If the
unit is being installed by a non-certified individual in an experimental aircraft, a factory-made
harness must be used for the warranty to be valid.

PS Engineering, Inc. warrants this product to be free from defect in material and workmanship
for a period of one (1) year from the date of installation as recorded in aircraft logbook and/or
on FAA Form 337. During the twelve (12) months, PS Engineering, Inc., at its option, will
send a replacement unit at our expense if the unit should be determined to be defective after
consultation with a factory technician.

All transportation charges for returning the defective units are the responsibility of the pur-
chaser. All domestic transportation charges for returning the exchange or repaired unit to the
purchaser will be borne by PS Engineering, Inc. The risk of loss or damage to the product is
borne by the party making the shipment, unless the purchaser requests a specific method of
shipment. In this case, the purchaser assumes the risk of loss.

This warranty is not transferable. Any implied warranties expire at the expiration date of this
warranty. PS Engineering SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. This warranty does not cover a defect that has resulted from im-
proper handling, storage or preservation, or unreasonable use or maintenance as determined by
us. This warranty is void if there is any attempt to dissemble this product without factory
authorization. This warranty gives you specific legal rights, and you may also have other
rights, which may vary from state to state. Some states do not allow the exclusion of limitation
of incidental or consequential damages, so the above limitation or exclusions may not apply to
you.

All items repaired or replaced under this warranty are warranted for the remainder of the origi-
nal warranty period. PS Engineering, Inc. reserves the rights to make modifications or im-
provements to the product without obligation to perform like modifications or improvements
to previously manufactured products.

Factory Service

The unit is covered by a one-year limited warranty. See warranty information above. Contact
PS Engineering, Inc. at (865) 988-9800 or www.ps-engineering.com/support.shtml before you
return the unit. This will allow the service technician to provide any other suggestions for
identifying the problem and recommend possible solutions.

After discussing the problem with the technician and you obtain a Return Authorization Num-
ber, ship product to:

PS Engineering, Inc.
Attn: Service Department
9800 Martel Rd
Lenoir City, TN 37772
Phone: (865) 988-9800

FAX (865) 988-6619

Email: [email protected]

NOTE: PS Engineering will not be responsible for any units shipped in the U. S. Mail. Units
returned without either an RMA, or a detailed description of the problem AND a contact name
and number will be refused.

Advertising