PULSE ShowerSpas 1021 Aloha - Manual (Page 2)

2
Aloha ShowerSpa 1021-SSB
Please Read The Following Instructions
COMPLETELY Before Beginning!
Our goal is to ensure your installation goes smoothly
and safely. Please read these instructions carefully
and follow recommendations for plumbing and
mounting. After reading instructions, if you
determine you do not have the necessary skills
and/or tools, we recommend that a licensed
plumbing contractor complete the installation.
If you encounter any problems during installation
CALL TECHNICAL SUPPORT
TOLL FREE at 888-785-7320
Before returning your ShowerSpa to the store
You Will Need The Following Tools
Drill with 3/16" (5mm) tile/masonry bit, Adjustable wrench,
Hammer, Phillips screwdriver and Pencil
Parts Legend
1. Aloha Showerspa ......................... 1
2. Shower Arm ................................. 1
3. Rubber Washer 6mm ................... 1
4. Showerhead ................................. 1
5. Top Cover ..................................... 1
6. Brass Nut ...................................... 2
7. Rubber Washer 2mm ................... 3
8. 90° Fitting .................................... 2
9. Compression Nut ......................... 2
10. Rubber Washer w/ Screen ......... 1
11. Retaining Washer ...................... 1
12. Mounting Plate .......................... 1
13. 2-1/2" Brass NPT Nipple ............. 1
14. Two Faced Tape ......................... 1
15. Wall Anchor ............................... 6
16. 1" Nail ......................................... 6
17. Hand Shower Mount ................ 1
18. Nut 4mm .................................... 2
19. Non Slip Washer ........................ 2
20. 1-3/8" Machine Screw ............... 2
21. Hand Shower ............................. 1
22. Hand Shower Hose .................... 1
A
B
C