PULSE ShowerSpas 1049B-BN Rio - Manual (Page 7)

7
Usage
Pressure Balance Mixing Valve
The Rio ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and tempera-
ture. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your
temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle
until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to
increase temperature. Be sure that the handle is in the OFF position when you are done using your ShowerSpa
so that pressure does not build up inside the unit.
Brass Diverter
The brass diverter is used to change between ShowerSpa functions. Simply rotate the diverter knob either direc-
tion to select the desired function—shower head, hand shower, body jets or tub spout.
Hand Shower
The brass hand shower has a sleek wand-shaped design that delivers a satisfying power-spray pattern with a
1.5M - 1.8M stainless steel stretch hose.
Body Jets
There are six single-function brass Silk Spray Jets that provide soothing spray. You can adjust the angle of spray
by pushing on the front edge of the jet in any direction.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
non-abrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
R E M E M B E R
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!