PULSE ShowerSpas 1048B-BN Niagara - Manual (Page 7)

7
Usage
Thermostatic Mixing Valve
The Niagara ShowerSpa comes equipped with a thermostatic mixing valve to safely control water temperature.
Once you set the knob to the desired operating temperature, the thermostatic mixing valve will regulate the
temperature, keeping it constant even when water pressure drops inside the plumbing lines (i.e. someone
flushes a toilet, etc.).
The button on the knob points to the current water temperature. Rotate the knob counter-clockwise to increase
temperature or clockwise to decrease temperature. Anti-scald technology is provided by limiting temperature to
38°C/100°F unless the button on the knob is pressed. To increase the temperature beyond 38°C/100°F, press the
button and continue turning counter-clockwise. Each time you revisit your ShowerSpa, allow the water to reach
operating temperature before entering the shower.
Brass Diverter
The Niagara Showerspa offers independent control of each function. Water pressure can be directed to a single
function or split between the different functions via the three diverter knobs. The three functions are rain
showerhead, hand shower and body jets. To turn a function on, rotate the knob 90°. To turn the ShowerSpa
off, rotate all diverters so the knobs are pointing up and leave the thermostatic mixing valve at the desired
temperature.
Hand Shower
The brass hand shower has a sleek wand-shaped design that delivers a satisfying power-spray pattern with a
1.5M - 1.8M stainless steel stretch hose.
Body Jets
There are three single-function jets with silicone tips for rub clean, Spray-Straight™ performance.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
non-abrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
Showerhead, handshower, and body jets have silicone rubber tips that should be rubbed periodically to help
break up any mineral deposits. This will ensure long lasting, Spray-Straight™ performance.
R E M E M B E R
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!