PULSE ShowerSpas 1025 Paradise - Manual (Page 7)

7
Usage
Pressure Balance Mixing Valve
The Waimea ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and
temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keep-
ing your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the
handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left
to increase temperature. Be sure that the handle is in the OFF position when you are done using your Shower-
Spa so that pressure does not build up inside the unit.
Brass Diverter
The brass diverter is used to change between ShowerSpa functions. Simply rotate the diverter knob either direc-
tion to select the desired function—shower head, hand shower, body jets or tub spout.
Hand Shower
The hand shower has a single power-spray pattern that can be used alone or in combination with any of the
other ShowerSpa functions.
Body Jets
There are six three-function brass Infinity Jets that provide misting, pulsating massage or stimulating sprays.
Simply rotate the head of the jet to change between functions. You can adjust the angle of spray by pushing on
the front edge of the jet in any direction.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
nonabrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
R E M E M B E R
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!