Ram Trucks 2005 3500 (Gas) - Manual (Page 239)

3rd gear with a loaded vehicle. An unloaded vehicle may
be launched in 2nd gear. Use each gear in numerical
order – do not skip a gear.
For most city driving you may find it easier to use only
1st through 4th gear ranges. For steady highway driving
with light accelerations, 5th gear is recommended. To
shift into 5th gear, move the shift lever to the right
beyond the spring pressure point and push it forward.
When shifting from 5th to 4th gear, pull the lever down
toward you in one motion. Do not pull the lever sharply
left as you may shift accidentally into 2nd gear and
damage the transmission.
5 Speed Manual Transmission Shift Speeds in mph
(km//h)
Engine Model Axle Mode
1 to
2
2 to
3
3 to
4
4 to
5
5.7L
2500/
3500
ALL
Accel
&
Cruise
15
(24)
25
(40)
40
(65)
45
(72)
Manual Transmission — 6-Speed
NOTE: The parking brake should be engaged before
leaving the vehicle, especially on an incline.
This model is equipped with a clutch interlocking igni-
tion system. The clutch pedal must be fully depressed to
start the vehicle.
STARTING AND OPERATING 239
5