Ram Trucks 2009 1500 - Quick Reference Guide - Manual (Page 11)

turn siGnals/Wipers/Washers/hiGh BeaM lever
TURn SIGnALS/LAne CHAnGe ASSIST
• Tap the lever up or down once and the turn signal (right or left) will flash
three times then automatically turn off.
WIPeRS
Intermittent, High and Low operation
• Rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Mist
• Push the end of the lever inward to the first detent for a single wipe to
clear mist.
Washer operation
• Push the end of the lever inward to the second detent to spray washer
fluid and operate the wipers.
High Beams
• Push the lever forward to activate the High Beams.
• A High Beam symbol will illuminate in the cluster to indicate the
High Beam lights are on.
electronic vehicle inforMation center (evic) controls
• The eVIC features a driver interactive display that is located in the
instrument cluster. Pressing the controls on the steering wheel allows
the driver to select vehicle information and Personal Settings.
front Wipers
Mist (push)
push lever for
high Beams
push
on/off
Button
188153_09b_Dodge_RAM1500_QRG_010909.indd 12 1/9/09 3:13:43 PM