Rear light bar id marker, Dual rear wheel) — if equipped – Ram Trucks 2009 3500 - Owner Manual User Manual
Page 478
Advertising
2. Turn the socket
1
⁄
4
turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from socket.
4. Reverse the procedure for installation of the bulbs and
housing.
Rear Light Bar ID Marker (Dual Rear Wheel) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄
4
turn counterclockwise to access the
bulb.
476
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: