Ram Trucks 2011 Chassis Cab - User Guide - Manual (Page 62)

SHIFT LEVER OVERRIDE
• If a malfunction occurs and the shift lever cannot be moved out of the PARK
position, you can use the following procedure to temporarily move the shift
lever.
Column Shifter
• Tilt the steering wheel to the full up position and firmly set the parking brake.
• Turn the Key Fob to the ACC or ON/RUN position without starting the engine.
• Press and maintain firm pressure on the brake pedal.
• Using a screwdriver, press and hold the override tab through the access port
(ringed circle) on the bottom of the steering column.
• Move the shift lever into the NEUTRAL position and start the vehicle.
• Release the parking brake.
• Have your vehicle inspected by your local authorized dealer immediately if the
shift lever override has been used.
WHAT TO DO IN EMERGENCIES
60