Starting procedure – engine manifold air, Temperature 0°f to 66°f (–18°c to 19°c) – Ram Trucks 2012 Chassis Cab - Diesel Supplement User Manual

Page 39

Advertising
background image

Starting Procedure – Engine Manifold Air
Temperature 0°F To 66°F (–18°C to 19°C)

NOTE:

The temperature displayed in the Electronic

Vehicle Information Center (EVIC) does not necessarily
reflect the engine manifold air temperature. Refer to
“Electronic Vehicle Information Center (EVIC)” in “Un-
derstanding Your Instrument Panel” for further informa-
tion. When engine temperatures fall below 66°F (19°C)
the “Wait To Start Light” will remain on indicating the
intake manifold heater system is active.

Follow the steps in the “Normal Starting” procedure
except:

1. The “Wait To Start Light” will remain on for a period
of time (length of time depends on engine temperature).

CAUTION!

If the “Water in Fuel Indicator Light” remains on, DO
NOT START engine before you drain the water from
the fuel filter to avoid engine damage. Refer to
“Maintenance Procedures/Draining Fuel/Water Sepa-
rator Filter” in “Maintaining Your Vehicle” for fur-
ther information.

2. After the “Wait To Start Light” goes off, turn the
ignition switch to the START position. Do not press the
accelerator during starting.

4

STARTING AND OPERATING

37

Advertising