Ram Trucks 2014 Chassis Cab Commercial - Uconnect 3.0 Manual - Manual (Page 12)

• Loudness (If Equipped) — Select “Loudness” and
press the ENTER/BROWSE button to mark the check
box on or off. Press the BACK button on your faceplate
when done.
• AUX Volume Offset (If Equipped) — Select “AUX
Volume Offset” and press the ENTER/BROWSE but-
ton. Turn the TUNE/SCROLL knob to adjust the
setting + or – 3. Press the BACK button on your
faceplate when done.
Clock Setting
1. Press the MENU button on your faceplate on the
bottom of the radio and press the ENTER/BROWSE
button for System Settings. Select the Time and Format
setting then select Set Time by pressing the ENTER/
BROWSE button.
2. Adjust the hours or minutes by turning the TUNE/
SCROLL knob, then press the ENTER/BROWSE but-
ton to move to the next entry. You can also select 12hr
or 24hr format by turning the TUNE/SCROLL knob,
then pressing the ENTER/BROWSE button on the
desired selection.
3. Once the time is set, select “OK” to exit the time
screen.
2
RADIO MODE 11