License lamp, Fluid capacities – Ram Trucks 2014 Cargo Van Commercial - Owner Manual User Manual
Page 625
License Lamp
The license plate lamp is located under the tailgate light
bar and above the license plate.
1. Using a small screwdriver, press inward the locking
tab on the outboard side of the lamp assembly and
pull down on the lamp assembly for removal.
2. Twist and remove the socket from the lamp assembly
and pull the bulb out to remove.
3. Push the bulb into the socket, twist the socket into the
lamp assembly and reinstall the lamp assembly into
place ensuring the locking tab is secure.
FLUID CAPACITIES
U.S.
Metric
Fuel (Approximate)
20 Gallons
76 Liters
Engine Oil with Filter
3.6L Engine (SAE 5W-20, API Certified).
6 Quarts
5.6 Liters
Cooling System *
3.6L Engine (MOPAR® Antifreeze/Engine Coolant
10 Year/150,000 Mile Formula or equivalent) meeting the
requirements of Chrysler Material Standard MS-12106.
13.4 Quarts
12.6 Liters
* Includes heater and coolant recovery bottle filled to MAX level. Add 2.9 Qts (2.8 L) if equipped with a rear heater.
7
MAINTAINING YOUR VEHICLE
623