Map keys to cycle rack focus, Red dsmc operation guide – RED DSMC User Manual
Page 127
RED DSMC OPERATION GUIDE
COPYRIGHT © 2015 RED.COM, INC
955-0020_V5.3, REV-J | 127
9. To set a rack point location, follow the instructions below:
A. Select the rack point: A, B, C, or D.
B. Select Close to return to the main screen.
C. Tap and hold the touchscreen where you want the rack point to be, or press and drag the rack point.
When you move a rack point, the camera autofocuses.
NOTE: To prevent a rack point from being accidentally moved, the rack point is less sensitive to touch
than the other focus targets. To fine-tune the rack point location, first drag the rack point farther than
it needs to be, and then drag it to where you want it to be.
NOTE: To view the focus distance for each rack point on the main screen, go to Menu > Settings > Display >
Modes and enable Rack Target Distance mode. For more information, go to
10. Select another rack point by performing any of the following actions:
‒ Select another rack point on the touchscreen.
‒ Press the key mapped to AF: Start (default is SH Record Half Press) to cycle to the next rack point in
order (A, B, C, and D). For example, if rack point A is selected when you trigger the AF: Start action,
the focus racks from point A to point B.
‒ Press a key that is mapped to racking to a specific rack point.
MAP KEYS TO CYCLE RACK FOCUS
You can map user keys to rack focus to different rack points. For more information, go to
.
You can map the following actions:
AF: Start
AF: Rack to A
AF: Rack to B
AF: Rack to C
AF: Rack to D