RED FOCUS - Manual (Page 7)

© 2011 RED.COM INC. AUGUST 17, 2011
6 6
BATTERY INSTALLATION / REPLACEMENT
Power is supplied to RED Focus via two (2) AA batteries.
To install/replace the batteries:
1. Remove the two (2) screws attaching the battery cover to RED Focus.
2. Remove the battery cover.
RED Focus with Battery Cover Removed
3. Install or remove / replace the batteries.
IMPORTANT: Ensure batteries are installed as shown on RED Focus battery holder or RED Focus
will not operate.
4. Install the battery cover and screws.
POWER CONSUMPTION
RED Focus draws 42ma of power when on for 2 minutes. At this power consumption, two (2) 1.5v AA bat-
teries will run the RED Focus for approximately 52 hours (depending on the battery quality and charge
when installed).