Reliable EV1 - Manual (Page 25)

23
MAINTENANCE
Disconnect the machine from the power
supply before any maintenance.
The machine is built with extremely reliable
technology and components; therefore it
does not require any special maintenance.
Careful use and strict compliance with these
instructions are the best way to achieve the
desired results and maximum performance.
This job must be performed after the
machine has cooled down completely.
We recommend eliminating any scale
deposits from the boiler at least twice a year
as follows:
t
%JTDPOOFDU
UIF
NBDIJOF
GSPN
UIF

power supply.
t
1MBDF
B
DPOUBJOFS
VOEFS
UIF
NBDIJOF


then remove plug X by turning it counter-
clockwise using round nose pliers or the
key provided (fig. 23).
t
%SBJO
UIF
CPJMFS
JOUP
UIF
DPOUBJOFS

UIFO

refit plug X with the relevant washer R.
CLEANING THE FILTERS
Check that the Hepa filter, the activated
carbon filter and the filter of the motor
air inlet are clean. If necessary, replace
these filters using original spare parts. It is
recommended that these filters be
replaced yearly.
REPLACING THE HEPA FILTER
t
%JTDPOOFDU
UIF
NBDIJOF
GSPN
UIF

power supply.
t
0QFO
UIF
HSJMM
PO
UIF
SJHIU
TJEF
CZ
QVTIJOH

the relevant fixing.
t
3FQMBDF
mMUFS
4
BOE
SFmU
UIF
HSJMMF
fig. 24
S
fig. 25
T
fig. 23
R
X
MAINTENANCE
CAUTION
ATTENTION
IMPORTANT