Reliable 2000CV - Manual (Page 20)

17
OPTIONAL STEAm KIT
The machine can works also with optional Steam Kit. The optional steam kit
provides different accessories where it is possible to use only the steam or
steam+chemical function.
Lock the selected accessory onto the flexible hose handle. Slip both ends on so
they fit completely (Fig. 14), taking care to double-check that assembly is correct.
Press button (1) on the handgrip to enable the steam ejection.
Press the trigger (5) on the bottom of the handle to eject steam (Fig. 15).
STEAm SUPPLY CONTROLS/CHEmICAL SUPPLY CONTROLS
• Keep button pressed (3 Fig. 16) on the handgrip to enable chemical
supply, the yellow pilot light (4) on the dashboard will turn on.
• All accessories included in the supply can be assembled by simply fitting
the two edges completely as shown in (Fig. 19).
• The square brush is usually employed to clean floors and for large flat
surfaces. The brush is equipped with a lever allowing the handle to rotate
as shown in (Fig. 20).
• Moreover 4 handy hooks allow to hang a cloth.
• Rotating triangular brush (Fig. 21).
• The rotating triangular brush is usually employed to clean small,delicate
surfaces and for uneven and irregular surfaces (armchair fabric pleats).
It has softer bristles. The steam is distributed directly on bristles
(patented system).
WANdS
• Wands are recommended for regular cleaning. Wands must be fitted
directly on the hose handgrip or on the wand extensions.
• Both can be used coupled with the set of circular brushes (Fig. 22).
WASHING/WIPING dEVICE
• The washing/wiping device is used to clean and wipe a surface.
• It consists of a natural bristle brush and a metal/silicone rod. It can be
directly fitted in the hose handgrip or in the extensions (Fig. 24).