Santec 2250LM - Manual (Page 3)

INSTALLATION INSTRUCTIONS
PAGE 03
HOT WATER
SUPPLY
COLD WATER
SUPPLY
Cold Valve Hot Valve
WATER TEST
- Turn on the cold water supply.
- Use the handle from the faucet set to turn the valve on and off.
- Check for leaks. If water leaks from any of the connections merely tighten the connections until the leak stops.
- Repeat the same procedure for the hot side
Santec Inc.
3501 Challenger Street, Torrance, CA 90503
Tel: (310) 542-0063 Fax (310) 542-5681
www.santecfaucet.com
03/03
2250LM _ _